Infrared Asphalt Repair in Nashville TN

May 8, 2022
12:08 am

#1 in Infrared Asphalt Patching Services in Nashville TN

Table of Contents

Being a property owner or Property manager of shopping centers, restaurants, office buildings, or other commercial businesses in Nashville is hard work. You’re responsible for the ongoing maintenance or repairs of parking lots and other utilities, which come with its rewards; quality tenants, top-tier customers, and a lot of traffic inflow from new leads.

Unfortunately, some things may be out to rip you off these benefits – if not tackled early enough.

Potholes, alligator cracks, and other pavement issues are a nightmare for residential or commercial property owners. They trust infrared asphalt repair for their parking lots in Nashville, TN. You can, too, if you read further.

What is Infrared Asphalt Repair?

Infrared asphalt repair is the most efficient way to repair your asphalt paving. The process involves heating asphalt with infrared technology until it softens enough to blend new and old asphalt seamlessly.

This repair process is probably something you’ve seen before around the streets of Nashville due to its mark as “the go-to” for both commercial and residential paving solutions. And assuming you haven’t, hop into a bump-free browsing ride to catch a glimpse of infrared asphalt repair near me.

Although quite famous, this straightforward on the surface yet the complex detailed process is reserved for professional asphalt repair providers in Nashville TN, only and not a DIY project. However, there’s no wrong in knowing what goes down during one.

So here are a few transformational steps in our process that will assist in a successful repair.

What is the Infrared Asphalt Process?

Step 1. Prepare damaged area

First, our asphalt professionals will clear the damaged area of any debris. This is perhaps the most critical aspect of any asphalt maintenance procedure for a lasting repair, and good area preparation prevents a recurrence of the problem.

Step 2. Heat the area

After that, an asphalt infrared machine is used to heat the asphalt surface. Depending on the weather and the depth of the existing asphalt, the standard asphalt heating ( 325 degrees )time may vary Colder climates and deeper asphalts may need to be heated longer.

Step 3. Installation

After the asphalt is heated, the next step is to rake loose debris and apply hot-mix asphalt to the damaged area. The asphalt can be rejuvenated if necessary, and only oxidized asphalt requires the addition of a rejuvenator.

Step 4. Leveling

After installing the new material, our asphalt professionals will level and compact the surface with a vibratory roller or plate. Once compacted, a seamless edge is formed, preventing water infiltration.

What Are the Pros and Cons of Infrared Asphalt Repair?

While infrared asphalt repairs can apply to a wide range of services, it’s essential to learn about any limitations it may have. First, let’s look at the beneficial side as it outweighs other minor constraints.

Pros of Infrared Asphalt Repair

The retaining of asphalt in infrared asphalt repair reduces its impact on the environment, thus making it a more friendly option.

It makes it simple to place speed bumps on roads and parking lots.

There’s no risk of separating the asphalt from the aggregate underneath as the infrared rays have a seamless deep penetrating heat.

It protects against moisture damage by blending new and existing asphalt seamlessly. This makes it perfect for mending pool water-collecting asphalt surfaces.
Using infrared asphalt repair with recycled asphalt reduces the need for new asphalt materials.

It eliminates the possibility of the underlying asphalt’s surface burning or scaling.

As a result of the simplicity of the process, as you’ve seen above, completing the repair requires fewer resources and time.

After the repair is completed, the road or paved surface is open again within 20-30 minutes.

It is used in commercial environments to level grates and utility hole covers and fix tiny cracks, divots, and surface potholes in pavements and driveways.

Additionally, it is used in residential applications to resurface asphalt roads with pooled water.

Cons of Infrared Asphalt Repair

“Every rose has its thorns”, but those prickly thorns can be avoided. The same is true for infrared asphalt repair when applied to the right services as it is not a one-size-fits-all solution.

Let’s learn if this repair method is the best for your project to avoid mishaps.

It is not recommended on large alligator, block, or fatigue crack networks.

It will not be effective in mending asphalt surfaces that have been sealed with specific compounds such as coal tar.

It is not recommended for use on oxidized or raveled asphalt surfaces since the new asphalt will not adhere to the existing structure.

It’s unsuitable for exposed potholes as repairing visible potholes necessitates removing the surface around the hole and replacing it with new material.

Because it is intended solely for patching, it is unsuitable on wide surface areas.

Being a surface-only solution, It’s not a suitable repair option for weak asphalt surfaces. Because already-degraded subsurfaces may even degrade further,

It is only a short-term fix. After a while, any asphalt will break down and need to be replaced entirely.

What Services Can You Use Infrared Asphalt Repair for in Nashville?

Although not a one-size-fits-all for all pavement problems, infrared asphalt repair has shown beyond doubt in specific types of services. Here are some of them:

Maintenance holes & Storm drains
Trench repairs
for hump and high spots
Water rerouting
Birdbaths (Puddles)
Paver seams
Utility openings
Oil spots
Pothole repair
Speed bump installation
ADA compliance
Rough surfaces
Asphalt patch

Conclusion

Property owners or property managers of shopping centers, restaurants, office buildings, and other commercial businesses can leverage infrared asphalt repair in Nashville, TN, to create aesthetically pleasing parking lots that attract quality customers.

Just one thing, be prepared to usher in an inflow of traffic from new customers because your sturdy new asphalt would be ready and re-opened to the public within minutes of completion.

Contact Gades strategic LLC to handle all your asphalt repair problems; our professionals are sturdy, just like our asphalt.

Click for more of Gaddes Strategic LLC’s asphalt repair services in Nashville, TN.

Infrared Asphalt Repair Markets:

Airports, Schools, HOA’s, Subdivisions, Municipalities, Camping Grounds, Mobile Home Parks, Shopping Centers, Office Buildings, Industrial Facilities, Shopping Malls, Retailers, Places of Worship, Gas Stations, Apartment Complexes, Storage Facilities, Restaurants, Health Care Facilities and more!

Infrared Asphalt Contractor Services:

Infrared Asphalt Repair Service Areas:

Gaddes Strategic, LLC Services to cities and local communities in Davidson County, TN, as well as other surrounding areas upon request:

Nashville TN, Antioch TN, Bellevue TN, Belle Meade TN, Davidson County TN, Goodlettsville TN, Whites Creek TN, Joelton TN, Old Hickory TN, Madison TN, Hermitage TN, East Nashville, Donelson TN, Green Hills many more!

Gaddes Strategic, LLC in the Media

Yahoo!

GlobeNewsWire

Media Room

26 thoughts on “Infrared Asphalt Repair in Nashville TN”

Comments are closed.